gheenoe cover

If you can put it on a noe, how would you do?

Moderators: Bassboyz, costefishnt

Postby HaMm3r » Wed Jun 27, 2007 12:01 pm

I brought home the 14-16' cover from Wal-mart, but ended up exchanging it for the next size up, 17-19', because I wanted it to cover the motor and the troller.

I also created a PVC frame like Bob, but I built it so that one end fits into the rod holders on the Gheenoe. The other end has a PVC T-shaped foot that stands on the center deck. It can't fall over unless the rod holders snap off or the gheenoe flips on its side!
User avatar
HaMm3r
 
Posts: 2458
Joined: Sun Feb 12, 2006 9:46 pm

Postby redgheenoe » Wed Jun 27, 2007 8:37 pm

I have a carbon fiber cover--wanna buy one?
redgheenoe
 
Posts: 299
Joined: Wed Feb 15, 2006 8:04 pm

Postby sleepy » Fri Jun 29, 2007 1:59 am

I have a guy that will custom make any cover and out of any material. He does a bang up job. He made me one using a silver tarp. He can make it as cheap or expensive as you want. 321-501-8329
sleepy
 
Posts: 35
Joined: Thu Feb 09, 2006 2:15 am
Location: Oak Hill, Fla

Gheenoe Cover

Postby whoHeis » Thu Jul 05, 2007 9:53 pm

I got this information from Pugar Gheen in Titusville for a cover to fit my 15'4".

Anderson Upholstery can make a cover for your boat-321-267-7028.
whoHeis
 
Posts: 3
Joined: Thu Jul 05, 2007 9:38 pm
Location: Salt Springs, Florida

Fantastic work

Postby Pinellas Deputy » Sat Jul 07, 2007 2:04 am

Had two covers from Pugars cover maker and I must say that they do a fantaatic job. Not cheap but if you want custom to cover the many towers motors etc that cause havoc for std. covers, these guys are the place. Cllose to the factory too.
Pinellas Deputy
 
Posts: 21
Joined: Sun Feb 05, 2006 3:38 pm
Location: Pinellas County

Postby JoeWelbourn » Sat Jul 07, 2007 6:31 am

I am posting these photos for duckdog23. Here is his Gheenoe cover and frame.

Here's a couple of photo's of my 1/2" PVC frame made to support the generic covers use by many of us GNUers. Frame cost under $5.00 to make and is not glued to allow for storage. Parts include 2-45Degree elbows, 4-90 degree elbows and 10' length of 1/2" PVC. Bungees are to keep it from sliding back into the boat. The long white pole is my pushpole.

Image

Image

Image

Image

Image
User avatar
JoeWelbourn
 
Posts: 587
Joined: Tue Feb 28, 2006 7:39 am
Location: South Tampa

Gheenoe cover

Postby duckdog23 » Sat Jul 07, 2007 7:32 am

Joe,
Many thanks for posting the pics.
I need to change my name to "computer challenged guy."
Dd23
duckdog23
 
Posts: 64
Joined: Tue Apr 03, 2007 8:15 am
Location: Tampa, Fl (South Tampa)

Postby fishgazam » Sat Jul 07, 2007 10:24 pm

Image

Image

Image

Image

this was a custom cover designed like a tanua cover on a pick up truck bed. It cost about $350 to do but was very useful because it could be used while on the highway.

more pix here... http://www.fishgazam.com/gallery/ac_boats/gheenoe_fishgazam01/

AC
User avatar
fishgazam
 
Posts: 844
Joined: Sat Feb 04, 2006 6:59 pm
Location: Winter Springs, Florida

Postby tthomas » Wed Jul 20, 2011 10:11 pm

who made for you, web site, phone #, any info. you might have. I want one. thanks. great boat!
tthomas
 
Posts: 293
Joined: Tue Mar 18, 2008 11:18 am
Location: nashville

Postby fishgazam » Wed Dec 12, 2012 8:14 pm

Someone was asking about a Gheenoe cover within the past few days so I resurrected this thread.

AC
User avatar
fishgazam
 
Posts: 844
Joined: Sat Feb 04, 2006 6:59 pm
Location: Winter Springs, Florida

Previous

Return to Tips & Tricks

Who is online

Users browsing this forum: No registered users and 0 guests

cron

x